Go to the homepage Go to the italian page
Home page > Kart > MyChron Expansion
AIM MyChron Expansion
MyChron Expansion is the new channel multiplier improving MyChron4 and MyChron4 2T performances, thanks to four additional channels and a further connector for the CAN bus.
Through this last connector MyChron4 can be connected to another AIM system (LCU Lambda controller, GPS, SmartyCam the on-board camera) or a Data key for data download.
Thanks to its specific wirings, MyChron Expansion powers MyChron4 and its peripherals with an external battery, avoiding logger internal battery consumption.
MyChron Expansion features four inputs to connect MyChron4 to an equal number of additional channels.
All channels are easily configurable as analog through MyChron4 menu to sample data outcoming from:
Exhaust gas valve position sensor (very important to understand at which RPM value the exhaust port opens)
Wheel speed sensor: the first input on the left can be configured also as digital input
No contact brake pedal position sensor
No contact throttle pedal position sensor (to know if and when to push harder on the accelerator)
Brake pressure sensor
Water temperature or cylinder head temperature (PT100 thermo resistor only)
Steering angle potentiometer (to highlight over/under steering situations)
Brake pedal potentiometer
Throttle pedal potentiometer
MyChron Expansion is a complete, value-for-money instrument for professional kart analysis.
Warning: MyChron Expansion DOES NOT support gear calculation.
This new expansion is to be considered as alternative to MyChron4 eBox.
Features
Dimensions: 127x24x33 mm
Weight: 194 g
Sampling frequency: 10 Hz